Corporate and Office Uniform Manufacturing in Faisalabad means producing staff uniforms in bulk, matched to your brand colours and sized to your actual team. We handle banks, offices, factories and retail chains across Punjab. With 30 years in the trade since 1996, we cut, stitch, embroider and deliver uniforms that survive Pakistani summers and daily wear. Share your headcount and deadline, and we will quote the same day.
Corporate and Office Uniform Manufacturing in Faisalabad covers the full production chain for staff uniforms: fabric selection, pattern development, cutting, stitching, logo embroidery or printing, finishing and bulk packing. A typical office order runs 80 to 400 pieces per style, in sizes from small to 4XL, with separate male and female cuts where needed. We work in cotton, poly-cotton, twill, gabardine and suiting blends, so a bank blazer and a factory coverall come off the same floor with the same quality control.
Local businesses need this because Faisalabad runs hot. From April to September, temperatures sit between 38C and 46C, and a cheap polyester shirt stops looking professional by 11am. We pick breathable weaves and pre-shrunk fabric so uniforms hold shape after 50-plus washes. Whether you need custom uniform stitching and tailoring for a 30-person office or a 500-piece wholesale run for a retail chain, we build the order around your headcount, budget and delivery date.
Every corporate uniform order covers the full production chain from design to delivered cartons. Fabric, cutting, stitching, branding and packing are all handled in-house, so there is no third-party delay in the middle of your order. Add-ons like rush production, individual sizing and export packing are quoted separately based on your requirements.
We develop the cut and produce a physical sample within 5 to 7 working days. You check fit, colour, stitch quality and logo placement on the actual garment before we commit fabric to bulk cutting. One round of adjustments is included at no extra cost.
We source poly-cotton, twill, gabardine and suiting from Faisalabad mills and verify GSM, shrinkage and colour fastness roll by roll. Rejected rolls go back to the mill. For orders above 200 pieces, we reserve one dye lot so every piece matches.
Straight-knife cutting with layer markers keeps sizes accurate to within 5mm. Stitching includes flat-felled seams, bar-tacked stress points and reinforced buttonholes. Finishing covers thread trimming, pressing and button checks before packing.
Chest logos, sleeve monograms and name badges are embroidered on our multi-head machines, holding detail down to 2mm. Large or high-contrast logos can be screen printed or heat transferred, with a test print on the actual fabric before the bulk run.
We size to your staff list and pack by size and department in labelled cartons. Orders above 150 pieces include free size exchange on up to 5 percent of stock. Outstation and export orders are packed to your labelling and carton requirements.
You share headcount, department breakdown, brand colours, logo files and your deadline. We ask about the working environment, indoor or outdoor, and the fabric weight you prefer. This call takes 20 to 30 minutes, and we send a written quote within the same working day.
Our pattern team develops the cut and sends a physical sample within 5 to 7 working days. You check fit, colour, stitch quality and logo placement on the actual garment. We adjust and re-sample once at no extra cost before locking the final spec for bulk production.
We source fabric from Faisalabad mills and verify GSM, shrinkage and colour fastness before cutting. For orders above 200 pieces, we reserve one dye lot so every piece matches. Fabric is pre-shrunk and inspected roll by roll, and rejected rolls go back to the mill, not into your order.
Cutting runs on straight-knife machines with layer markers that keep every size accurate to within 5mm. Our stitching floor handles flat-felled seams, bar-tacked stress points and reinforced buttonholes. Logo embroidery or screen printing is done in-house, so there is no third-party delay in the middle of your order.
Every finished piece passes a 12-point inspection covering seams, buttons, zips, measurements and logo alignment. We pack by size and department in labelled cartons and deliver anywhere in Faisalabad within 24 hours of completion. Outstation orders ship through our freight partners with tracking.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Used for bulk fabric cutting with layer markers that keep every size accurate to within 5mm across a 300-piece run. This accuracy is what stops size drift on large corporate orders.
Run chest logos, sleeve monograms and name badges in-house, holding detail down to 2mm. Multiple heads mean a 200-piece logo order adds only 2 to 3 working days to the schedule.
Handle flat-felled seams, bar-tacked stress points and reinforced buttonholes. These are the machines that decide whether a uniform survives 50-plus industrial washes.
Verifies fabric weight before cutting. A 180 GSM twill and a 220 GSM twill look similar on the roll but behave very differently after washing, so we check every lot.
Tests fabric samples for shrinkage percentage and colour bleed before bulk cutting. Rolls that fail go back to the mill rather than into your order.
Used for large or high-contrast logos where embroidery would be too dense. We test print on the actual fabric before the bulk run so colours stay true after washing.
A bank was opening 12 new branches and had 180 staff waiting for uniforms. The previous supplier had delivered mismatched shades across two earlier batches, and staff were wearing old uniforms of different colours at customer-facing counters.
We developed three patterns for teller, officer and manager grades, ran the full 180-piece order from a single dye lot, and delivered 16 working days after design approval. Cartons were packed by branch and grade, so each location received its complete set without sorting at head office.
A 90-person export office had mismatched uniforms bought piecemeal over two years. Staff wore different shades of blue, and the polyester fabric became unbearable in summer, with complaints peaking between May and July.
We switched the office to a breathable 60/40 poly-cotton poplin in brand colours, sized each employee individually, and embroidered the logo on chest and sleeve. Rush production delivered all 90 uniforms in 10 working days, with only three size adjustments needed.
A logistics company needed 400 driver uniforms with high-visibility options for night routes. Their previous supplier had delivered reflective tape that peeled after a few washes, and cartons arrived unsorted, costing the warehouse team a full day of sorting.
We manufactured heavy poly-cotton shirts and trousers with verified reflective tape, packed cartons by size and depot, and delivered on schedule. A repeat order for 150 pieces six months later matched the original shade exactly, with no drift.
Most companies come to us after a bad experience with a previous supplier. These are the problems we hear about most, and how we handle them differently.
Ask a pro →We dye-lot fabric in one batch for orders above 200 pieces and keep a retained sample on file. Repeat orders are matched against that sample before cutting, so the shade stays consistent across every batch you order from us.
We pre-shrink fabric and verify colour fastness before cutting. Our poly-cotton blends hold shape after 50-plus industrial washes. If a fabric roll fails inspection, it goes back to the mill rather than into your order.
Every confirmed order comes with a written production schedule showing cutting, stitching, finishing and dispatch dates. If a machine goes down or a fabric roll fails, we tell you the same day and adjust the plan rather than letting the date slip silently.
We size to your actual staff list, not a generic chart, and orders above 150 pieces include free size exchange on up to 5 percent of stock. For senior staff, made-to-measure cutting removes the sizing risk entirely.
PKR 1,800 - PKR 6,500 per piece depending on fabric, style and quantity
Corporate uniform pricing in Faisalabad depends on fabric, style complexity, quantity and branding method. Typical 2026 pricing runs from PKR 1,800 per piece for a basic poly-cotton shirt to PKR 6,500 for a lined blazer with embroidered logo. Orders above 300 pieces get a lower per-piece rate because cutting and setup costs spread across more units. We quote the same working day you share your headcount and deadline, with no hidden charges added later.
The per-piece price covers fabric, cutting, stitching, branding, finishing and packing, all handled in-house. There is no third-party markup buried in the quote, and the written production schedule means you know exactly what you are paying for and when it arrives.
A 180 GSM poly-cotton shirt costs less per piece than a 220 GSM twill or a suiting-blend blazer. Fabric typically accounts for 40 to 55 percent of the per-piece price, so the choice here moves the quote more than any other factor.
Cutting and setup costs are fixed per style, so they spread thinner across larger orders. A 500-piece run usually costs 15 to 25 percent less per piece than a 100-piece run of the same design, with the same fabric and stitching quality.
Screen printing is the cheapest per-piece branding option for large logos. Embroidery costs more per piece but holds up better on formal uniforms. Heat transfer sits between the two and works well for high-contrast designs on darker fabrics.
A basic shirt and trouser set uses fewer operations than a lined blazer with piped pockets and a waistcoat. Each additional panel, lining or trim adds stitching time, which shows up in the per-piece price.
“We needed 220 uniforms across 14 branches in six weeks. A.G. Fabrics sampled in five days, and the final delivery landed on day 16. The embroidered logos matched our brand book exactly, and the size exchange on 11 pieces was handled without argument. Two years on, the shirts still hold colour after weekly washing.”
Imran S.Operations Manager, Bank Branch Network, Faisalabad
✓ Verified“Our office runs hot in summer and the previous supplier's polyester shirts were unbearable. A.G. Fabrics switched us to a 60/40 poly-cotton poplin and the difference was obvious in the first week. They sized 90 staff individually and only three needed adjustments. The written schedule meant I could tell management exactly when uniforms would arrive.”
Ayesha K.HR Lead, Textile Export Office, Madina Town
✓ Verified“We ordered 400 driver uniforms with high-visibility options for night routes. The reflective tape was verified before cutting, and the cartons came packed by size and depot, which saved our warehouse team a full day of sorting. Repeat order for 150 more pieces came through with the same fabric shade, no drift.”
Bilal R.Procurement Head, Logistics Company, Sargodha Road
✓ VerifiedMost corporate uniform orders in Faisalabad run between PKR 1,800 and PKR 6,500 per piece in 2026, depending on fabric, style and quantity. A basic poly-cotton shirt sits at the lower end, while a lined blazer with embroidered logo sits at the top. Orders above 300 pieces get a lower per-piece rate because cutting and setup costs spread across more units. Share your headcount and we will quote the same day.
Our minimum order is 50 pieces per style for standard office uniforms. Below that, setup and cutting costs push the per-piece price up sharply. For mixed orders, like 30 shirts and 30 trousers, we treat it as one style set and keep the 50-piece minimum. Sample and prototype orders can be placed as single pieces before you commit to bulk.
Standard bulk orders take 12 to 18 working days from design approval to delivery. That covers sampling, fabric sourcing, cutting, stitching and finishing. Rush orders of 100 to 300 pieces can be completed in 7 to 10 working days with a confirmed deposit. Delivery within Faisalabad adds 24 hours; outstation shipping adds 2 to 4 days depending on the destination.
Yes. We match fabric to your brand colours using Pantone references or physical swatches, and we embroider or print your logo in-house. For orders above 200 pieces, we dye-lot the fabric in one batch so the shade stays consistent. We send a physical sample with your logo applied before bulk production starts, so you approve the exact placement and thread colour first.
Custom Uniform ManufacturingWhen your office needs a cut that is not on any standard chart, we build the pattern from scratch. Custom uniform manufacturing covers unusual sizes, specific pocket layouts and branded trims, all produced on the same floor as our corporate orders.Explore →
Bulk Uniform Manufacturing and Wholesale SupplyFor distributors and retail chains, we run wholesale uniform supply from 500 to 5,000 pieces with staged delivery. Corporate clients with multiple branches use this service to stock uniforms across locations without placing separate small orders.Explore →
OEM and Private Label Uniform ManufacturingIf you sell uniforms under your own brand, we manufacture to your label with your tags, packaging and size markings. OEM and private label production keeps your brand identity intact while we handle cutting, stitching and finishing.Explore →
Custom Uniform Stitching and TailoringAlready have fabric or a design? Our tailoring unit stitches to your spec, including blazers, waistcoats, trousers and shirts. Corporate clients often use this for replacement pieces when one employee joins mid-year and needs a matching uniform fast.Explore →
Made-to-Measure Uniform ManufacturingFor senior management and front-desk staff, made-to-measure uniforms give a sharper fit than standard sizing. We take individual measurements and cut single garments, so directors and managers get uniforms that look tailored, not issued.Explore →
Uniform Design and Pattern DevelopmentOur pattern team develops cuts, collars, pocket shapes and trim details before a single piece is stitched. Corporate clients use this stage to test how a design reads across departments, from reception to warehouse, before committing to bulk.Explore →
Uniform Sampling and Prototype DevelopmentWe produce physical samples within 5 to 7 working days so you can check fit, colour and logo placement on the actual garment. Sampling catches problems before bulk cutting, which saves both fabric and time on large corporate orders.Explore →
Uniform Fabric Sourcing and Wholesale SupplyWe source poly-cotton, twill, gabardine, suiting and cotton from Faisalabad mills and verify GSM and shrinkage before cutting. Clients who want fabric-only supply for their own stitching can order through this service.Explore →Send us your headcount, brand colours and deadline, and we will quote your Corporate and Office Uniform Manufacturing in Faisalabad order the same working day. No obligation, no pressure. Call +923007674374 or message us with your staff list and we will take it from there.
Request a Quote +923007674374 →Call or email with your garment type, quantity and required date and we will come back with a per-piece price and a lead time, usually within one working day. Our unit is open Monday to Friday, 08:00 to 18:00, and Saturday morning for sample collection. Local buyers are welcome to visit the floor and check fabric before ordering.