Transport in Faisalabad means one thing for fleet owners: uniforms that survive 12-hour shifts, diesel stains, and 45-degree summers without falling apart. A.G. Fabrics has stitched driver, loader, and logistics staff uniforms for Punjab fleets since 1996. We handle fabric sourcing, cutting, embroidery, and bulk delivery under one roof, so your drivers look sharp and your procurement stays simple.
Transport uniforms are the shirts, trousers, coveralls, and hi-vis vests worn by drivers, loaders, conductors, and logistics staff. We build them from poly-cotton twill, cotton drill, and ripstop blends that hold colour after 50+ industrial washes. Every piece is cut to your fleet's spec, stitched with reinforced bar-tacks at stress points, and finished with your company logo embroidered or screen-printed on the chest, back, or sleeve.
Faisalabad fleets run hard. Goods carriers move between the Sargodha Road industrial belt, the Faisalabad Dry Port, and the M-4 Motorway corridor daily, and uniforms take a beating from diesel, grease, and road dust. That is why we build driver uniforms with double-stitched seams, gusseted crotches, and stain-resistant finishes. Whether you run 20 trucks or 200, we supply bulk uniform manufacturing and wholesale supply that keeps every driver kitted out on schedule.
Every transport uniform order covers design, fabric, cutting, stitching, branding, and delivery. We handle the full production chain in-house, so you deal with one supplier instead of coordinating a tailor, an embroiderer, and a fabric trader. Here is what is included as standard.
We develop a graded pattern for your fleet's roles and send a physical sample within 5-7 working days. Two revision rounds are included, covering fit, fabric weight, colour, and logo placement. You approve the sample before bulk cutting begins.
We source poly-cotton twill, cotton drill, ripstop, and hi-vis polyester from Faisalabad mills. You approve the fabric swatch before cutting, so there are no surprises on colour or weight. Local sourcing keeps lead time to 3-5 days.
Layered cutting handles 500-5,000 pieces per batch with consistent sizing. Stitching uses industrial lockstitch and overlock machines with bar-tacks at stress points. Finishing covers thread trimming, pressing, and size labelling.
Chest, sleeve, and back branding via 12-thread-count embroidery or screen printing. Embroidery survives 50+ industrial washes; screen printing delivers sharp logos at lower per-piece cost for high-volume orders.
We grade patterns from XS to 5XL and offer made-to-measure options for non-standard builds. Cartons are packed by size and role, labelled clearly, and dispatched to your Faisalabad address or anywhere in Punjab.
Every batch passes a 3-point inspection covering stitch integrity, size accuracy, and branding placement. Delivery within Faisalabad is same-week after QC clearance; nationwide dispatch takes 2-4 days.
You tell us your fleet size, roles (driver, loader, conductor, supervisor), fabric preference, and branding needs. We ask about climate exposure, laundry method, and whether hi-vis or flame-resistant workwear is required. This call takes 20-30 minutes and ends with a written quote.
Our design team develops the pattern and sends a physical sample within 5-7 working days. You check fit, fabric weight, colour, and logo placement. We revise up to two rounds at no extra cost until the sample matches your spec exactly.
We source fabric from Faisalabad's own textile mills, which keeps lead times short and quality consistent. Poly-cotton twill, cotton drill, ripstop, and hi-vis polyester are stocked or mill-ordered within 3-5 days. You approve the fabric swatch before cutting begins.
Our cutting floor handles 500-5,000 pieces per batch using layered cutting for consistency. Stitching runs on industrial lockstitch and overlock machines with bar-tacks at pocket corners, belt loops, and crotch seams. Standard production takes 10-14 working days.
Every batch passes a 3-point inspection: stitch integrity, size accuracy, and branding placement. We pack by size and role, label each carton, and dispatch to your Faisalabad address or anywhere in Punjab. Delivery within Faisalabad is same-week after QC clearance.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Used for main seams on driver shirts, trousers, and coveralls. Lockstitch holds under heavy fabric tension and resists seam failure through daily fleet wear.
Finish raw edges on poly-cotton and cotton drill to prevent fraying. Overlock stitching is standard on all transport uniform seams for durability.
Apply logo embroidery to chest, sleeve, and back panels at high volume. 12-thread-count stitching survives 50+ industrial washes without peeling.
Cut 500-5,000 pieces per batch with consistent sizing. Layered cutting ensures every shirt and trouser matches the approved sample.
Reinforce pocket corners, belt loops, and crotch seams. Bar-tacks prevent blowouts at stress points under daily fleet use.
Apply reflective tape and heat-transfer branding for hi-vis and night-visibility uniforms. Presses bond reflective material for EN ISO 20471 compliance.
Verify fabric weight before cutting. GSM testing ensures poly-cotton twill and cotton drill meet the 240-280 GSM spec approved by the client.
A Sargodha Road fleet was replacing driver uniforms every 6-8 months. Shirts faded within weeks, seams blew out at pocket corners, and logo prints peeled after 15 washes. Fleet manager was spending PKR 2.8 million annually on replacements.
We switched the fleet to 260 GSM poly-cotton twill with bar-tack reinforcement and 12-thread-count embroidery. Uniforms now last 20+ months, and the annual replacement cost dropped to PKR 1.1 million. The fleet ordered 340 sets in the first batch.
A Faisalabad Dry Port logistics firm had 80 night-shift drivers wearing plain shirts with no reflective gear. Safety audits flagged non-compliance, and drivers reported near-misses on the M-4 corridor.
We supplied 160 Class 2 hi-vis vests and reflective-piped shirts with EN ISO 20471 tape. Night visibility improved immediately, and the firm passed its next safety audit. Reflective tape held up through 25+ industrial washes over 12 months.
A fuel tanker fleet had 45 drivers handling hazardous loads in standard cotton coveralls with no flame resistance. Safety compliance was a concern, and the fleet needed FR gear fast.
We manufactured 90 FR coveralls from treated fabric that resists ignition and self-extinguishes. Each coverall included reflective trim and embroidered branding. Bulk dispatch took 14 working days, and the fleet met industrial safety requirements.
Fleet managers call us when uniforms fall apart, sizing is inconsistent, or branding peels after a few washes. Here are the most common problems we fix for transport companies across Faisalabad and Punjab.
Ask a pro →We use 240-280 GSM poly-cotton twill and cotton drill with stain-release finishing. These fabrics hold colour through 50+ industrial washes and last 18-24 months under daily fleet use, cutting replacement frequency by more than half.
We cut from graded patterns with layered cutting for consistency across 500-5,000 pieces. Every batch matches the approved sample. For non-standard builds, we offer made-to-measure uniform manufacturing at no extra design cost.
Our 12-thread-count embroidery survives 50+ industrial washes, unlike heat-transfer prints that peel after 15-20. We also offer woven patches and reflective branding for night-shift logistics crews.
Standard bulk orders dispatch in 12-18 working days. For repeat clients, we hold your pattern on file and re-run identical batches in 8-10 days, so new hires get uniforms fast.
PKR 1,800 - PKR 4,500 per set depending on fabric, branding, and volume
Transport uniform pricing in Faisalabad depends on fabric weight, branding method, order volume, and any special finishes like FR treatment or hi-vis tape. Standard driver shirts and trousers run PKR 1,800-3,500 per set in 2026. Hi-vis vests add PKR 600-1,200 per piece, and FR coveralls start at PKR 4,500. Bulk orders above 500 pieces get wholesale pricing, typically 15-25% below single-unit rates. We quote per order after understanding your fleet size, roles, and branding needs.
Bulk pricing and durable fabric mean your cost per wear drops significantly. A uniform that lasts 20 months instead of 8 cuts annual replacement spend by more than half, and consistent branding keeps your fleet looking professional at every delivery point.
Poly-cotton twill and cotton drill in the 240-280 GSM range cost more than lightweight cotton but last 2-3 times longer. FR-treated fabric and hi-vis polyester add 30-50% to base fabric cost.
Orders above 500 pieces get wholesale pricing, typically 15-25% below single-unit rates. Orders above 2,000 pieces get additional discounts on cutting and stitching.
12-thread-count embroidery costs more per piece than screen printing but survives 50+ industrial washes. Reflective branding and woven patches add cost based on placement count and complexity.
Stain-release finishing, FR treatment, and reflective tape application add per-piece cost. These finishes extend uniform life and meet safety requirements, so they often pay back within 12-18 months.
“We run 85 trucks out of Sargodha Road and needed driver uniforms that survive diesel and dust. A.G. Fabrics delivered 340 shirts and trousers in 14 days, all consistent sizing. The embroidery on our logo still looks sharp after eight months of daily wear. Repeat order for new hires came in nine days.”
Imran S.Fleet Manager, Sargodha Road
✓ Verified“Our loaders were burning through cheap uniforms every few months. We switched to A.G. Fabrics' poly-cotton twill sets and they are lasting 18 months plus. The bar-tacks at pocket corners and belt loops made a real difference. Bulk pricing on 600 pieces saved us about 20% versus our previous supplier.”
Faisal M.Logistics Supervisor, Faisalabad Dry Port
✓ Verified“We needed hi-vis vests and reflective shirts for night-shift drivers on the M-4 corridor. A.G. Fabrics sourced EN ISO 20471 tape and delivered 220 pieces in 11 days. The reflective visibility is excellent, and the fabric holds up through industrial laundering. Their team handled sizing for our female staff without any issues.”
Ayesha K.Operations Head, Jhang Road Transport Co.
✓ VerifiedStandard driver shirts and trousers run PKR 1,800-3,500 per set depending on fabric weight and branding. Hi-vis vests add PKR 600-1,200 per piece, and flame-resistant coveralls start at PKR 4,500. Bulk orders above 500 pieces get wholesale pricing, typically 15-25% below single-unit rates. Embroidery and screen printing are quoted separately based on logo complexity and placement count.
Standard bulk orders of 500-5,000 pieces take 12-18 working days from approved sample to dispatch. Sampling itself takes 5-7 working days. If you need uniforms faster, we offer a 7-10 day rush option for repeat clients whose patterns are already on file. Delivery within Faisalabad is same-week after QC clearance.
Yes. We manufacture high-visibility safety uniforms with reflective tape rated for night visibility, built for drivers and loaders working the M-4 Motorway and city night routes. Options include Class 2 and Class 3 hi-vis vests, reflective piping on shirts, and full hi-vis coveralls. Reflective tape meets EN ISO 20471 visibility standards and holds up through 25+ industrial washes.
We deliver across Punjab and nationwide, plus export orders to the UAE, Saudi Arabia, UK, and Germany. For Punjab-based fleets in Lahore, Multan, and Islamabad, dispatch takes 2-4 days after QC. Export orders ship via Karachi port or air freight, with documentation handled by our export team. Freight cost depends on order volume and destination.
Custom Uniform ManufacturingWe build transport uniforms from scratch to your fleet's spec, covering fabric, cut, branding, and sizing. Every order starts with a pattern developed for your drivers' roles and climate exposure.Explore →
Bulk Uniform Manufacturing and Wholesale SupplyFleet orders of 500-5,000 pieces get wholesale pricing and consistent sizing. We hold your pattern on file for fast repeat runs, so new hires get uniforms without long waits.Explore →
OEM and Private Label Uniform ManufacturingIf you supply uniforms under your own brand, we manufacture to your label with your tags, packaging, and branding. Export-ready documentation available for UAE, UK, and EU clients.Explore →
Custom Uniform Stitching and TailoringWe stitch driver shirts, trousers, coveralls, and vests with reinforced bar-tacks at stress points. Industrial lockstitch and overlock machines handle heavy fabric without seam failure.Explore →
Made-to-Measure Uniform ManufacturingDrivers with non-standard builds get uniforms cut to their measurements. Send chest, waist, and height, and we grade the pattern so every piece fits without post-delivery tailoring.Explore →
Uniform Design and Pattern DevelopmentOur design team develops patterns for driver, loader, conductor, and supervisor roles. We test fit on real body types before cutting bulk, so sizing stays consistent across the fleet.Explore →
Uniform Sampling and Prototype DevelopmentWe send a physical sample within 5-7 working days for your approval. Two revision rounds are included, covering fit, fabric weight, colour, and logo placement.Explore →
Uniform Fabric Sourcing and Wholesale SupplyWe source poly-cotton twill, cotton drill, ripstop, and hi-vis polyester from Faisalabad mills. Local sourcing cuts lead time to 3-5 days and keeps wholesale pricing competitive.Explore →Send us your fleet size, roles, and branding needs, and we will quote within 24 hours. Samples ship in 5-7 working days, and bulk orders dispatch in 12-18 days. Call +923007674374 to start your transport uniform order today.
Request a Quote +923007674374 →Call or email with your garment type, quantity and required date and we will come back with a per-piece price and a lead time, usually within one working day. Our unit is open Monday to Friday, 08:00 to 18:00, and Saturday morning for sample collection. Local buyers are welcome to visit the floor and check fabric before ordering.